Archive for the ‘News’ Category

Who Wants Some? It’s Free!

Posted: January 26, 2012 in News, Promo

UPDATE! As of 3/31 we are out of samples, thanks to all for participating in our development.

Our potion master has been working on another traction compound recipe. This time we want you to give it a try and let us know what you think. If you would like to participate in the development of our new chemical simply email us with an address and we will send you a small sample.

After using it tell us what you think. Be sure to tell us what brand tires were used (new/old), what surface you ran, what you used to clean the tires how long you let the chemical set up and what you can compare it too. We want any and all feedback from users, like this one

“Ok so the first thing I noticed was the smell. It doesnt smell like any other traction compound I had used before, but its not harsh at all. Before I went to the track I used it on an old take off tire I had lying around. I let it settle in the rubber for 10 minutes and wiped the rest off, once it dryed the tire felt so soft I couldnt believe it and this was on a dried out takeoff tire. It makes r32s feel like r24s and the rubber doesnt come off on the paper towel like some do. At the track I ran with muchmore 32s and I clean my tires with carb cleaner. Im not sure what to compare it to, it seems to give the tires a few more laps before the grip falls off and the tires get a bit warmer as well. Thank you guys, someone finally took the time to make a great compound and not just bottle wintergreen oil.”     -Robert.D

Thanks Rob Im glad you like it. Hope you dont mind I cleaned up your grammar.


Test Pictures…

Posted: November 30, 2011 in News

Today we tested our new traction compound recipe, performance level surpassed what we had expected and we will bottle it up and make it availible as soon as December 1st. Thanks for your feedback, hope you guys like it.

Open Orders…

Posted: September 30, 2011 in News

Pre orders for the carbon fiber TC body are now excepted.

Email us.

 for instructions and delivery dates…

New TCzero11 Pictures…

Posted: September 26, 2011 in News


Posted: September 8, 2011 in News

We are going to retire our BMW M3, its been a great seller and one of my favorites, but instead of remaking a new mold we’re going to make room for new models.

Congrats to everyone that owns one of these beautiful pieces im sure theyll be around for a while. Expect to see some new thing pop up soon, more track focused parts.

First Look…

Posted: August 11, 2011 in News


Posted: August 3, 2011 in News

Ok I had to share this. So I have been employed to help develop different resin transfer processes for other companies and their projects. With new types of resin and high pressures I was able to come up with a new process that produced very light parts and I recently got a chance to apply it to something RC related.

This process had proven to be one thing, expensive, the resin isnt easy to get and the method itself is very hard to pull off correctly. But after trying it I think it might be worth all the hassle. I was able to shed a lot of weight off a 5B body. Normally clocking in at about 120 grams for the carbon ones and about the same for the lexan ones, I was expecting it to weigh around 80 grams using the same amount of fabric as we always have. However, same amount of fabric, it came out at 65.9 grams painted.

Heres the thing. While fail testing we discovered by doing this process you could used less reinforcement fabric and still keep the desired strength. Less fabric means less resin which means even lighter parts. So 65.9 grams and there is still excess fat on it. Judging on what I know from this I believe its possible to make a touring car body that weighs about half what a lexan body weighs and still being a lot stronger than one… Something to think about…